Прочный в использовании 1 шт. X 200 кг электронная платформа весы тензодатчик давление балансный консольные нагрузки Вес сенсор

Прочный в использовании 1 шт. X 200 кг электронная платформа весы тензодатчик давление балансный консольные нагрузки Вес сенсор



РАСПРОДАЖА

Сохранить : US$0

Изначальная цена : US $11.03
Descuento : 0%
Store name : ELDOER Electric Manufacturer Store
product score : 4.9
Последняя цена : US $11.03
   Подробнее Подробнее   







NOTE:
in order add the life of the sensor to prevent damage caused by being overweight .
as usual ,200KG sensor only can be used to delivery 200kg.


Technical parameters
Comprehensive error : 0.02% F.S
Sensitivity :1.0 0.1mv / v
Nonlinearity: 0.02% F.S
Hysteresis: 0.02% F.S
Importance of :0.02% F.S
Creep: 0.02% F.S/10min
0:00 Output :2% F.S
Input Impedance :405 10
Output impedance :350 3
Insulation resistance :5000M (100VDC)
Excitation voltage :5VDC ~ 12VDC
Temperature compensation range :10 ~ +40
Operating temperature range: -20 ~ +60
Temperature effect on zero 0.03% F.S/10
Temmp.effect 0.02% F.S/10
Safe overload 120%
Ultimate Overload 150%
Protection class IP65

Wiring
Black Power + , white Power - Red Signal + green signal -


Use Special Note:
The sensor is a precision parts, severe vibration , fall , collision ,
overload , overvoltage , etc. , are very likely to cause permanent damage to the sensor or
affect the accuracy and linearity , if you do not necessarily understand the parts ,
please buy carefully . After all, the resistance and capacitance transistors and other components
compared to other electronic components to be more fragile .


Resistance strain gauge pressure sensorMainly by the elastic body ,
the resistance strain gauge cable and other components ,
the internal circuit using Huygens bridge, when the elastic body is deformed under load ,
Resistance strain gauge ( conversion element ) film subjected to tensile or compressive strain deformation ,
its resistance will change ( increase or decrease ) , so that the bridge out of balance ,
a corresponding differential signal for subsequent measurement circuit and handling.