Car hood insulation cotton is a hair foam, outside covered with a layer of fiberglass reinforced aluminum coating, coated with a layer of pressure sensitive adhesive on the back. This product is most suitable for use in automotive engine compartment, usually attached to the lower side of the hood. Product under the hood attached to the surface must first cut a good size before. Compared with adhesive on one side smooth, so the film can be made with the lower surface of the hood close contact, they would not in the middle of the formation of bubbles. Material can withstand temperature range is -40 degree to + 107 degree
Cotton insulation Construction Notes:
1, if the original engine comes heat shield must be completely cleared before construction to protect the construction effect.
2, due to Baoxin hood insulation cotton larger size, the remaining part after the cut, depending on the various models (such as the firewall between the engine and the gear case installation voids) may be residual material, according to the size of the gap small pieces cut, then paste
Engine speed operation, heat generation, a sharp rise in the temperature of the cabin, the car bonnet overheating, prolonged accelerated aging paint, paint high temperature fade, crack, noise, smoke, rain cover issues
Length: 100CM *140CM
This product uses advanced acoustic insulation of alumina fiber + cotton manufacturing, high temperature value up to 1000
Be tailored according to their size car hood, very simple! Soundproof cotton size large enough! Used in the engine cover only more, no less
Quality assurance, selected materials. Plastic flocking + felt thermoforming, based on irregularities within the framework of the agreement cover manufacturing. Installation is very simple.
Installation: easy and quick to install, own to complete, direct Nianshang Qu,
Hood insulation pads role:
1 enables the engine heat is evenly distributed, to avoid overheating the cover.
Case 2 to give the engine warm winter in the parking stall time apart is not too long to keep the car under the hot state.
3. To play a sound role in absorbing shock.
4. separated oil and gas, not greasy engine compartment of various flying everywhere